seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Installing the telephone mounting: > < Telephone mounting for vehicles 06.00 ?
Removing telephone mounting
Removing telephone mounting
–  Before beginning dismantling work, perform the following steps:
–  Switch off ignition and all electrical consumers and pull out ignition key.
–  Remove the mobile telephone from the mounting.
–  Unclip the mobile telephone mounting from the mobile telephone bracket.
–  Detach connector, if necessary. The cable connector is located in the mobile telephone mounting.
   
–  Remove bolt in retaining plate -arrow-.
  N91-0430
–  Unscrew the securing screw from the base mounting using a screwdriver as shown.
  N91-0431
–  Remove the base mounting from the dash panel. In the process, detach the connector in the base mounting, then push up and remove.
  N91-0437

Installing the telephone mounting: > < Telephone mounting for vehicles 06.00 ?