seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Lights and switches in engine compartment > < Converter with 12 V-230 V electric socketU13: Removing and installing

Leon Mk2

Holder of the converter with 12 V-230 V electric socketU13: Removing and installing
Holder of the converter with 12 V-230 V electric socket -U13-: Removing and installing
Special tools and workshop equipment required
   
t  Lever -U30800-
  W00-2169
t  Torque wrench kit -SAT 8010-
  WARNING
In the housing of the converter with 12 V-230 V electric socket -U13- there are condensers that can be charged with a residual voltage.
t  There is a risk of current surge.
t  The housing of the transformer with 12 V-230 V electric socket -U13- must never be opened.
Removal:
–  Switch off ignition and all electrical consumers and take out ignition key.
–  Remove the central console → Bodywork, interior fitting work; Rep. gr.68
  L00-10226
–  Remove the Converter with 12 V-230 V electric socket -U13- → Chapter
–  Unfasten nuts -2, 3 and 4-.
–  Remove the holder -1- of the converter with 12 V-230 V electric socket -U13-.
Installation
Installation is carried out in reverse order, noting the following:
l  Tightening torque → Chapter
  E96-10171

Lights and switches in engine compartment > < Converter with 12 V-230 V electric socketU13: Removing and installing