SEAT Workshop Service and Repair Manuals > Leon Mk2 > Vehicle electrics | Electrical system | Lights, lamps, switches inside, anti-theft system | Alarm system (DWA) | Ultrasonic alarm system sensor G209 | Ultrasonic alarm system sensor G209 : Removing and installing (vehicles without sun roof)

Ultrasonic alarm system sensorG209: Removing and installing (vehicles without sun roof)

Ultrasonic alarm system sensor -G209-: Removing and installing (vehicles without sun roof)

Special tools and workshop equipment required

t	Wedge -U 30800-

Note

The alarm system must be deactivated to remove the ultrasonic sender of the alarm system → Chapter.

Removing:

–	Disconnect ignition and all electrical loads, and remove ignition key.

–	Disengage the cover -1- with the disassembling wedge -U 30800- from the inserts, with the -arrows- upper.

–	Disconnect the connector -arrow A- of the ultrasonic alarm system sensor -G209--2-.

–	Remove the ultrasonic alarm system sensor -G209--2- in the -direction of arrow B- from the trimming-1-.

Installing:

Install in reverse order.

SEAT Workshop Service and Repair Manuals