seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Glove compartment lightW6 > < Headlight range control regulatorE102 and switch and instrument illumination regulatorE20

Leon Mk2

Removing and installing switches and instruments illumination regulatorE102 and headlight range control regulatorE20
Removing and installing switches and instruments illumination regulator -E102- and headlight range control regulator -E20-
  Note
When removing and installing components that are in view (switches, covers, trim and so on), mask off areas in which tools (removal wedge -VAS 3409-, screwdriver) are used to lever out those components using commercially available tape.
Removing:
–  Switch off ignition and all electrical loads, and pull out ignition key.
–  Remove light switch → Chapter.
   
–  Unscrew securing bolt -arrow- and unclip switch trim -1- from dash panel.
  N96-10906
–  Release and separate connector -arrow- and remove switch trim -1-.
  N96-10907
–  Release retainers -arrows- on both sides and push the headlight range control regulator -E102- and switches and instruments illumination regulator -E20- forwards out of switch trim.
Installing:
Installation is carried out in reverse order.
  N96-10908

Glove compartment lightW6 > < Headlight range control regulatorE102 and switch and instrument illumination regulatorE20