seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
General description of the immobilizer 01.2007? > < Removing and installing door warning lamps

Leon Mk2

Replace door warning lamp bulbs
Replace door warning lamp bulbs
  Caution
When removing and installing components in areas on view (switches, covers, trim and so on), mask off areas in which leverage tools (plastic wedge, screwdriver) are used to lever out those components using commercially available adhesive tape.
Special tools and workshop equipment required
   
t  Removal wedge -VAS 3409-
Removing:
–  Remove door warning light → Chapter.
  W00-0016
–  Carefully unclip lens from bulb housing in area of catches -arrows-.
  N94-11975
–  Pull out wedge-base bulb in -direction of arrow- in straight line upwards from holder.
Glass-base bulb 12 V, W5W
Installing:
For fitting, the operations are carried out in reverse order to the removal, taking the following into account:
  Note
When fitting the lens to the light housing, make sure that all catches engage securely.
  N94-11976

General description of the immobilizer 01.2007? > < Removing and installing door warning lamps