seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Sliding roof regulator E139 : removing and installing > < Remove and install the door contact switches
Remove and install the left front power window switch E40 with the switch for internal immobiliser E150
Remove and install the left front power window switch -E40- with the switch for internal immobiliser -E150-
   
–  Introduce a plastic wedge or a knife between the covering and the switch and free the flange from the left support.
–  Turn the left side of the switch upwards.
  N96-0025
–  Pull by hand on the switch simultaneously towards the left and upwards and carefully free the installation frame.
–  Remove the visible plugs from the switch.
  N96-0026

Sliding roof regulator E139 : removing and installing > < Remove and install the door contact switches