Removing and installing headlight range control motor |
The Servo motor for adjusting headlamp range cannot be removed. When damaged, the headlight must be replaced. |
Note t
| If control motors are removed and reinstalled or renewed, the headlight adjustment must be checked and adjusted as necessary → Booklet701. |
t
| The illustrations show the renewal of the headlight range control motor for the left headlight. |
t
| The renewal of the headlight range control motor for the right headlight is carried out in the same way. |
t
| To renew the servomotor, the headlight housing has to be cut open and then sealed again with a screw-fitted cover cap from the repair set → ETKA (Electronic parts catalogue). |
–
| Switch off ignition and all electrical loads, and pull out ignition key. |
|
|
|