seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Adjusting the headlight: Countries with left-hand drive traffic for driving in countries with right-hand drive traffic, ALHAMBRA > < Repairing side retaining tab
Repairing rear retaining tab
Repairing rear retaining tab
Special tools and workshop equipment required
   
t  Torque screwdriver -V.A.G 1624-
–  Switch off ignition and all electrical loads, and pull out ignition key.
–  Remove headlight
  W00-0984
–  Unscrew both securing bolts -arrows- and remove rear securing tab -1- from headlight housing.
–  Position new rear securing tab -2- on headlight housing and tighten securing screws -3- to 1.0 Nm.
–  Install headlight.
–  Check the adjustment of the headlamp and adjust when necessary, see „maintenance to be considered precisely“: → Booklet701.
  N94-12211

Adjusting the headlight: Countries with left-hand drive traffic for driving in countries with right-hand drive traffic, ALHAMBRA > < Repairing side retaining tab