seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Substitution of the full beam lamp > < Bulbs for double lamps with blinkers: substitute
Substitution of the bulb of the side lamp
Substitution of the bulb of the side lamp
   
–  Loosen the fixing wires -arrows- and remove the cover.
  E94-0069
–  Extract the connector -1- of the bulb.
–  Press the fixing wire -2- until the clip is loosened -3- and unblock it.
–  Extract the bulb -4- from the reflector.
–  Do not touch the bulb glass when installing it.
–  Place the new bulb so that the tabs of the plate disk fit into the reflector recess.
–  Attach the connector -1-.
–  Mount the cover.
–  After installing a new bulb check that the headlamps works.
  E94-0072

Substitution of the full beam lamp > < Bulbs for double lamps with blinkers: substitute