seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Headlights: removing and fitting > < Install the high beam adjustment motor

Leon Mk2

Adjust the headlights
Adjust the headlights
  Note!
For the headlight adjustment, use a headlight adjustment apparatus. The target values are found in Millimetric Maintenance. → Millimetric maintenance.
   
Main left headlights (adjustment screws of the right headlight inverted):
1 - Height adjustment
2 - Side adjustment
–  Before adjusting the headlights, set the high beam adjuster at position -0-.
–  Fit the Phillips head screwdriver or the hexagonal socket screwdriver through the holes in the lockholder.
–  Turn the side adjustment screws -2- and the height adjustment screws -1- until the correct adjustment has been achieved.
Special tools and workshop equipment required
  N94-0215
t  Headlight adjustment unit -SAT 1300-
Proceed as follows:
  Note!
The headlight adjustment target values are found in the maintenance booklet.
  W00-2713
Left headlight (the right headlight adjustment screws are symmetric):
1 - Vertical adjustment
2 - Horizontal adjustment
To adjust the headlights horizontally and vertically, turn the corresponding screw with a Phillips screwdriver or a hexagonal box spanner.
  E94-0111

Headlights: removing and fitting > < Install the high beam adjustment motor