seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Adjusting the headlight: Countries with right-hand drive traffic for driving in countries with left-hand drive traffic, Altea, A > < Adjusting the headlight: Countries with left-hand drive traffic for driving in countries with right-hand drive traffic, Freetrac

Leon Mk2

Adjusting the headlight: Countries with right-hand drive traffic for driving in countries with left-hand drive traffic, Altea, Altea XL ►03.09
Adjusting the headlight: Countries with right-hand drive traffic for driving in countries with left-hand drive traffic, Altea, Altea XL ►03.09
Equipment for adjusting the headlight to the running direction vehicle diagnostic, testing and information system -VAS 505X- and adhesive film → Spare parts catalogue
  Note
With the goal of adjusting the lights of a vehicle that drives on the right side of the road (left-hand drive) for driving on the left side of the road or for the lights of a vehicle that drives on the left side of the road (right-hand drive) for driving on the right side of the road. Headlight adjustment is necessary so that vehicles that are driving in the opposite direction are not dazzled. In the control unit for cornering light and headlight range control -J745-, you are able to adjust the headlight via the vehicle diagnostic, testing and information system -VAS 505X-; the AFS system must be deactivated for this purpose → Chapter
  Note
t  With adhesive → spare parts catalogue, path:
t  ElsaWin
t  Internet area
t  Download adhesive film for headlights; Altea, Altea XL ►03.09
t  Print out appropriate file to obtain adhesive film E.1/1.
t  Cut out masking foil around circumference. This serves for positioning the masked area on the headlight.
t  Cut out masking area marked on adhesive foil and then glue to headlight.
Headlight, left-hand side:
   
–  Clean the headlight glass and allow to dry.
–  Use the continuous line -2- on the bulb glass and the bottom lens curve -1- as reference for positioning the adhesive film.
–  After positioning, remove transparent area leaving only the covered area on the glass.
Headlight, right-hand side:
  E94-10317
–  Clean the headlight glass and allow to dry.
–  Use the continuous line -2- on the bulb glass and the bottom lens curve -1- as reference for positioning the adhesive film.
–  After positioning, remove transparent area leaving only the covered area on the glass.
  E94-10316

Adjusting the headlight: Countries with right-hand drive traffic for driving in countries with left-hand drive traffic, Altea, A > < Adjusting the headlight: Countries with left-hand drive traffic for driving in countries with right-hand drive traffic, Freetrac