seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Adjusting the headlight: Countries with left-hand drive traffic for driving in countries with right-hand drive traffic, Freetrac > < Repair kit for headlight housing: fitting|Installation

Leon Mk2

Adjusting the headlight: Countries with left-hand drive traffic for driving in countries with right-hand drive traffic, Altea, Altea XL 03.09
Adjusting the headlight: Countries with left-hand drive traffic for driving in countries with right-hand drive traffic, Altea, Altea XL 03.09
t  In countries where vehicles are driven on the opposite side of the road to the vehicle's normal environment, both headlights must be partially masked by appropriately shaped opaque adhesive strips to prevent oncoming traffic from being dazzled by the asymmetric dipped beams.
t  With the goal of adjusting the lights of a vehicle that drives on the right side of the road (left-hand drive) for driving on the left side of the road or for the lights of a vehicle that drives on the left side of the road (right-hand drive) for driving on the right side of the road, we have adhesive films that can be cut out and stuck on the headlight glass → Spare parts catalogue.
  Note
t  With adhesive → spare parts catalogue, path:
t  ElsaWin
t  Internet area
t  Download adhesive film for headlights; Altea, Altea XL ►03.09
t  Print out appropriate file to obtain adhesive film E.1/1.
t  Cut out masking foil around circumference. This serves for positioning the masked area on the headlight.
t  Cut out masking area marked on adhesive foil and then glue to headlight.
Headlight, left-hand side:
   
–  Clean the headlight glass and allow to dry.
–  Use the continuous line -2- on the bulb glass and the bottom lens curve -1- as reference for positioning the adhesive film.
–  After positioning, remove transparent area leaving only the covered area on the glass.
Headlight, right-hand side:
  E94-10315
–  Clean the headlight glass and allow to dry.
–  Use the continuous line -2- on the bulb glass and the bottom lens curve -1- as reference for positioning the adhesive film.
–  After positioning, remove transparent area leaving only the covered area on the glass.
  E94-10314

Adjusting the headlight: Countries with left-hand drive traffic for driving in countries with right-hand drive traffic, Freetrac > < Repair kit for headlight housing: fitting|Installation