seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Tightening torque > < Removal:

Leon Mk2

Installation
Installation
Installation is carried out in the reverse order, noting the following:
   
–  Check distance of adjusting bolt -1- to its limit, and clearance -a- with the bodywork.
  E94-10046
–  Fit headlamp and screw in upper securing bolt -2- tightening slightly.
  N94-10005
–  Adjust the clearances with respect to the bodywork, tightening or loosening the adjustment socket on the bolts -1- and -2-.
–  Tighten the side bolts -1-, lower bolts -2- and upper bolts -3-.
–  Install front right bumper → Exterior body installation work; Rep. gr.63.
–  Adjust the headlights → Chapter.
  E94-10022

Tightening torque > < Removal: