seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Installing > < Rear parking aid sender: removing and installing
Removing
Removing
Switch off ignition and all electrical consumers, and remove ignition key.
   
Fitting location of the parking aid sender -1-: in rear bumper.
  E94-10237
–  Remove the rear bumper → General body repairs, exterior; Rep. gr.63
  N94-10131
–  Unplug electric connector -arrow- of the sender.
–  Press both retainer tabs aside -arrows- and press the parking aid sender from outside to inside.
  E94-10238

Installing > < Rear parking aid sender: removing and installing