seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Rear parking aid buzzerH15: Removing and installing > < Parking aid control unitJ446: Removing and installing
Front parking aid warning buzzerH22: Removing and installing (8-channel parking aid)
Front parking aid warning buzzer -H22-: Removing and installing (8-channel parking aid)
Removal:
–  Switch off ignition and all electrical consumers and take out ignition key.
t  Installation location: Front on the dash panel cross member, in the drivers footwell
–  Remove storage compartment on driver's side → Rep. gr.68.
   
–  Unplug electrical connector -arrow-.
–  Use TORX screwdriver to unscrew threaded pin -1- for fastener.
–  Detach warning buzzer.
Installation
Installation is carried out in reverse order, noting the following:
–  Press threaded pins into fasteners.
–  Install driver's storage compartment → Rep. gr.68.
  A94-0321

Rear parking aid buzzerH15: Removing and installing > < Parking aid control unitJ446: Removing and installing