seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Removing and installing senders for parking aid (front) > < Front parking aid warning buzzerH22: Removing and installing (8-channel parking aid)
Rear parking aid buzzerH15: Removing and installing
Rear parking aid buzzer -H15-: Removing and installing
Removal:
   
–  Switch off ignition and all electrical consumers and take out ignition key.
t  Installation location: At rear left of luggage compartment beneath side trim
–  Remove left side trim → Rep. gr.70.
–  Unplug electrical connector -arrow-.
–  Unscrew threaded pin 1- for expanding clips using a TORX-screwdriver.
–  Remove the warning buzzer.
Installation
Installation is carried out in reverse order, noting the following:
–  Press threaded pins into fasteners.
–  Install left side trim → Rep. gr.70.
  E94-10265

Removing and installing senders for parking aid (front) > < Front parking aid warning buzzerH22: Removing and installing (8-channel parking aid)