seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Tightening torques: Lights, lamps and exterior switches > < Removing and installing senders for parking aid (front)
Rear parking aid sender: removing and installing
Rear parking aid sender: removing and installing
   
Removal:
t  Installation location: In bumper cover -arrows-.
  E94-10210
–  Remove rear bumper cover → Rep. gr.63.
–  Unplug electrical connector -1- on sender.
–  Push both retainer tabs aside -arrows- and push out sender -2- inwards.
Installation
Installation is carried out in reverse order, noting the following:
–  Install rear bumper cover → Rep. gr.63.
  A94-10062

Tightening torques: Lights, lamps and exterior switches > < Removing and installing senders for parking aid (front)