After performing service work on the vehicle it might be necessary to re-calibrate the system of the reversing camera. This might be required after:
t
Removing and installing reversing camera
t
Renewing reversing camera system control unit
t
Performing accident repair work on rear lid
t
Carry out repairs and an alignment to the axles.
Special tools and workshop equipment required
t
Vehicle diagnostic, testing and information system -VAS 505X-
t
Calibration unit -VAS 6350-
t
Distance laser -VAS 6350/2-
Before calibration can be carried out using the vehicle diagnostic, testing and information system -VAS 505X-, extensive preparation work has to be carried out first. This is described in the following.