Leon Mk2
| General assembly diagram: steering column combined switch |
Note!| t | Other information for mounting the steering column |
| t | → Running gear; Rep. Gr.48 |
| 1 - | Torx screw |
| q | 6.5 Nm |
| q | Substitute |
| 2 - | Steering wheel |
| q | Friction ring for horn operation → Fig. |
| 3 - | Hexagonal nut with collar |
| q | 50 Nm |
| 4 - | Airbag |
| q | Removal and installation → Body-installation work, interiors; Rep. Gr.69 |
| 5 - | Toothed adapter socket multiple |
| q | Removal and installation → Running gear; Rep. Gr.48 |
| 6 - | Spring |
| 7 - | Securing bolts for the steering column combined switch |
| 8 - | Switches for intermitents, dipped and bright lamps, and flashing lamps. Switch for windscreen wipers and windscreen washers |
| q | Removal → Chapter, Steering column combined switch: removal and installation |
| 9 - | Fixing screw for top and bottom parts of the lining |
| 10 - | Lining - bottom part |
| 11 - | Steering lock body |
| q | Removal and installation → Chapter, Starter switch and locking cap; lockout cap: removal and installation |
| 12 - | Support ring |
| 13 - | Steering column |
| 14 - | Lining - top part |
| 15 - | Regulator |
| 16 - | Fixing screws for the regulator |
