–
| Depending on the vehicle equipment, disconnect the connector from the mounts -1-, -2-, -3- and -4-. |
Note When installing the steering column electronics control unit -J527- the coil must not move from the centre position. The front wheels must be positioned „straight ahead“. |
–
| Loosen the 3 fixing screws -arrows- and remove the steering column electronics control unit -J527- to the rear of the steering column switch. |
Installation is carried out in the reverse order, noting the following: |
Caution The return lever of the indicator switch may get damaged when installing the control unit. |
The indicator lever must be located in the 0 position for installing the control unit so that the return lever is not open. |
|
–
| Insert the Steering column electronics control unit -J527- straight into the steering column switch. |
|
|
|