seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fitting the steering column switch > < Remove the switch fitted on the steering column

Leon Mk2

Install the switch fitted on the steering column
Install the switch fitted on the steering column
Install in the reverse order.
–  Install the passenger side airbag unit . → Bodywork - Installation work; Rep. Gr.69
  Note!
t  Consult the radio antitheft code before disconnecting the battery earth strap.
t  If the battery is reconnected, the vehicle equipment (radio, clock, electric windows) must be checked, following the instructions in the Repair Manual and/or Instruction Manual.
–  Removing the driver airbag. → Bodywork, fitting work, interior; Rep. Gr.69
   
–  Remove the Phillips head screws -1-.
–  Remove the Torx bolt -2-.
–  Removing the lower steering column switch lining -3-.
  E94-0119
–  Unplug the connector from the recoil unit.
–  Unscrew the hexagonal nut (50 Nm) -2-.
–  Set the steering wheel -1- in the middle position (wheels straight).
–  Remove the steering wheel -1- from the steering column.
–  Remove the upper steering column switch lining -1-.
  E94-0122
–  Unscrew the fixing bolts -arrows-.
  E94-0120
–  Unplug the connectors -arrows- from the steering column switch.
–  Remove the connector -1- from the guide next to the steering lock body, pulling downwards.
  E94-0121

Fitting the steering column switch > < Remove the switch fitted on the steering column