seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Removing and installing tail light bulb holder in rear lid, vehicles 11.03?? > < Removing and installing tail light bulb holder in rear lid, vehicles ??05.00
Removing and installing tail light bulb holder in rear lid, vehicles 06.00 ▸ 10.03
Removing and installing tail light bulb holder in rear lid, vehicles 06.00 ► 10.03
Removing:
–  Switch off ignition and all electrical consumers and remove ignition key.
–  Remove cover in rear lid trim.
   
–  Release retaining lug -arrow- and take out bulb holder.
–  Pull off connector.
The reversing light and rear fog light are installed on the left side.
t  Upper bulb for reversing light, 12V/21W
t  Lower bulb for rear fog light, 12V/21W
The reversing light is installed on the right side.
t  Upper bulb for reversing light, 12V/21W
Installing:
Install in reverse order of removal.
  N94-0493

Removing and installing tail light bulb holder in rear lid, vehicles 11.03?? > < Removing and installing tail light bulb holder in rear lid, vehicles ??05.00