SEAT Workshop Service and Repair Manuals > Leon Mk2 > Vehicle electrics | Electrical system | Starter-current supply-CC | Alternator | Alternator voltage regulator | Voltage regulator: removing and installing; manufacturer: Bosch

Voltage regulator: removing and installing; manufacturer: Bosch

Special tools and workshop equipment required

t	Screwdriver -V.A.G 1624-

Removing:

–	Detach alternator.

Vehicles with 1.2 l fuel injection engine, 47 kW → Chapter

Vehicles with 1.4 l fuel injection engine, 55 and 74 kW → Chapter

Vehicles with 1.6l fuel injection engine, 77 kW → Chapter

Vehicles with 1.4 litre TDI engine, 51, 55 and 58 kW → Chapter

Vehicles with 1.9 litre SDI engine, 47 kW → Chapter

Vehicles with 1.9 litre TDI engine, 74, 96 and 118 kW → Chapter

–	Unscrew the bolt and the nuts -arrows- and remove the protective cap of the alternator.

–	Remove the bolts attaching the voltage regulator -arrows-.

–	Remove the alternator voltage regulator.

Fitting:

Install in reverse order.

–	Tighten the fastening bolts or nuts to the torques shown → Chapter .

SEAT Workshop Service and Repair Manuals