Leon Mk2
AEE, AEX, AKV, ALM, APQ, engines without air conditioning |
1 - | Screws, M10 x 55, 55 Nm |
q | Aluminium engine block: Changing the screws (covered with sealant) |
2 - | Screws, M3 x 18 |
3 - | Protective cap |
4 - | Star screws, M4 x 25 |
5 - | Voltage regulator |
q | Checking the brushes → Chapter |
q | Removing and installing → Chapter |
6 - | Alternator |
q | Tightening torque of cable B+ → Anchor |
7 - | Ribbed belt |
q | Removing and installing → Chapter |
q | Path of the Poly-V belt → Fig. |
8 - | Tension support |
9 - | Screws, M8 x 25, 25 Nm |
10 - | Screws, M8 x 35, 25 Nm |
11 - | Screws, M8 x 85, 25 Nm |
12 - | Support |