Leon Mk2
4 cyl. injection engine with power steering: distinctive letters APE, AQQ, AUA and AUB |
1 - | Hexagonal bolts |
q | Gray electrical block: M10 × 50 mm |
q | Aluminium cylinder block: M10 × 55 mm. Replace bolts (coated with sealant) |
q | 55 Nm |
q | Tightening sequence: Firstly, tighten the upper right screw, → Item, then the lower right → Item, and finally, the lower left ones (in order) |
2 - | Support |
3 - | Hexagon bolt |
q | Gray electrical block: M10 × 95 mm |
q | Aluminium cylinder block: M10 × 100 mm. Replace bolts (coated with sealant) |
q | 55 Nm |
q | Tightening sequence: Firstly, tighten the upper right screw, → Item, then the lower right → Item, and finally, the lower left ones (in order) |
4 - | Hexagonal nut M8 |
5 - | Star-headed screw |
q | M5 × 20 mm |
6 - | Protective cap |
7 - | Star-headed screw |
q | M4 × 20 mm |
8 - | Voltage regulator |
q | Removal and installation → Item, → Item, → Item, → Item |
q | Checking Brushes → Chapter, alternator brushes: checking |
9 - | Alternator |
q | Tightening torque of cable B+ on the alternator → Chapter, Ribbed, Poly-V belt driven compact alternator |
10 - | Ribbed belt |
q | Removal and installation → Chapter |
q | Installation of the ribbed belt Poly-V → Chapter, Installation of the ribbed belt Poly-V |
11 - | Tension roller |
12 - | Hexagonal bolts |
q | M8 × 85 mm |
q | 25 Nm |