It is possible to immobilise the tensioning device using a mandril of 4.5 mm Ø, of approx. 55 mm long -arrow-. |
–
| Remove the ribbed belt Poly-V. |
Mounting the ribbed belt Poly-V |
Note! t
| When installing the ribbed belt recall the direction of rotation marked before removing it |
t
| Ensure, before installing ribbed- belt, that all ancillaries (alternator, air conditioner compressor, PAS vane pump) are secured tightly |
t
| On installing the belt make sure that the ribbed belt is well seated in the pulley |
–
| Install the ribbed belt Poly-V. |
–
| Remove the mandril of 4.5 mm Ø. |
–
| Start engine and check how belt is running. |
|
|
|