Leon Mk2
4 cylinder injection engine with air conditioning compressor and/ or power steering, code letters AER, ALL |
1 - | Trapezoidal belts |
q | Remove and install → Chapter |
q | Trapezoidal belt activation → Chapter |
2 - | Alternator |
q | Replace the trapezoidal belt disc → Chapter |
3 - | Voltage regulator |
q | Test the carbon brushes → Chapter |
4 - | Hexagonal nut M5 |
5 - | Hexagonal bolt M4 × 8 |
6 - | Protection |
7 - | Hexagonal bolt |
q | 55 Nm |
q | For aluminium blocks M10 × 55: replacing the bolts (covered with sealant) |
q | For cast iron blocks: M10 × 50 |
q | Tightening order: First tighten the upper right bolts, then the lower right and finally the left ones (looking forward) |
8 - | Hexagonal bolt |
q | For aluminium blocks M10 × 100: replacing the bolts (covered with sealant) |
q | For cast iron blocks: M10 × 95 |
q | Tightening order: First tighten the upper right bolts, then the lower right and finally the left ones (looking forward) |
9 - | Support |
10 - | Tensioning roller |
11 - | Hexagonal bolts M8 × 85 |
q | 25 Nm |