| –
| Push and hold down securing clip on hose connection and pull hose connection off headlight washer system pump -V11--7-. |
| –
| Drain any escaping fluid in a suitable container. |
| –
| Disconnect connector -1- from headlight washer system pump -V11-. |
| –
| Pull headlight washer system pump -V11- upwards out of reservoir for windscreen and headlight washer system. |
| Install in the reverse order of removal. When doing this, note the following: |
| –
| On completion of installation work, bleed headlight washer system → Chapter. |
|
|
|
