seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing washer jet assembly > < Removing and installing headlight washer system pump V11

Leon Mk2

Removing and installing pop-up washer jet cylinder
Removing and installing pop-up washer jet cylinder
Removing:
–  Switch off ignition and all electrical consumers and remove ignition key.
   
–  Pull spray jets with cap -1- out of bumper cover onto stop.
–  Unclip cap -1- from mounting points -arrows- on washer spray jet assembly.
  N92-10021
–  Remove front bumper → General body repairs, exterior; Rep. Gr.63.
–  Push and hold down the securing clip -2- and pull the hose connection -1- away from the pop-up cylinder.
–  Remove securing screws -3-.
Installing:
Install in the reverse order of removal. When doing this, note the following:
–  Tighten threaded connections to specified torque settings → Chapter.
–  On completion of installation work, bleed headlight washer system → Chapter.
  N92-10028

Removing and installing washer jet assembly > < Removing and installing headlight washer system pump V11