seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Removing cowl panel grille > < Removing windscreen wiper system (vehicles 06.00???04.01)
Removing wiper arms
Removing wiper arms
  Note!
t  The wiper arm and cowl panel must be removed to remove the wiper frame with rods and wiper motor.
t  Before the wiper arms are removed, ensure that the wiper motor is in the end position. Only then can the wiper arm park position be correctly set when installing.
t  Run motor to park position by switching ignition on and operating wiper switch briefly.
–  Disconnect battery → Chapter.
   
–  Loosen securing nut -arrow-, but do not remove completely.
–  Release wiper arm from taper by rocking arm sideways.
–  Then remove securing nut completely and detach wiper arm.
–  If required, repeat work sequence for second wiper arm.
  Note!
Removal of the wiper arm on the right side of the vehicle is performed in the same way.
  N92-0261

Removing cowl panel grille > < Removing windscreen wiper system (vehicles 06.00???04.01)