seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Relay carrier > < Relay carrier: removing and installing

Leon Mk2

Fuse holder on the battery: remove and install
Fuse holder on the battery: remove and install
The fuse box is located over the battery, in the engine bay
Removing
–  Switch off ignition and all electrical consumers.
–  Disconnect the negative cable of the battery → Chapter.
   
–  Open the fuse box cover -1-.
–  Remove bolt-2-.
–  Unclip the tabs -arrows- and remove the fuse box cover -1- upwards.
  E97-10175
–  Unclip the tabs -arrows- and remove the cover -1-.
  E97-10176
–  Remove the nut -1- and remove the fuse holder -3- upwards.
–  Unscrew the nuts -4- and remove the fuse plate -2-.
Installing
Installation is carried out in the reverse order, noting the following:
–  Tighten the fastening bolts or nuts to the torques shown → Chapter.
  E97-10177

Relay carrier > < Relay carrier: removing and installing