seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Connecting the central diagnosisVAS > < Clamping sleeve: Removing and installing.
Vehicle Diagnosis, Testing and Information Systems
Vehicle Diagnosis, Testing and Information Systems
The description of the setup is carried out for the valid installations: For more information, see → Catalogue of company tools and equipment
  Note
Observe the latest operating instructions for the vehicle diagnosis tester, which are displayed after selecting the „Administration“ and „Operating Manual“ keys.
Special tools and workshop equipment required
t  Vehicle diagnostic, testing and information system -VAS 5051B-
t  Vehicle diagnostic, testing and information system -VAS 5052A-
t  Vehicle diagnostic, testing and information system -VAS 6150 / VAS 6150A-
t  Vehicle diagnostic, testing and information system -VAS 6150B Profesional-
   
t  Vehicle diagnostic, testing and information system -VAS 6150B Startline-
t  Vehicle diagnostic, testing and information system -VAS 6160 Premium-
  E97-10613
t  5 m line -VAS 5051/6B-
t  3m line -VAS 5051/5A-
  Note
For diagnosis, only the above-mentioned cables should be used, as only these are fitted with CAN-Bus lines and allow a CAN-Bus diagnosis or communication via CAN-Bus .
  W00-10062

Connecting the central diagnosisVAS > < Clamping sleeve: Removing and installing.