seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Installing: > < Removing and installing front bass loudspeakers

Leon Mk2

Removing:
Removing:
  Note
Removal and installation is performed in the same manner on the left and right sides.
Carry out the following work:
–  Turn off the ignition and all electricity consumers.
Remove door trim → General body repairs, interior; Rep. gr.70 or → General body repairs, interior; Rep. gr.70
   
–  Release locking mechanism of connector at loudspeaker -arrow- and pull out connector.
  N91-11486
–  Drill out rivets -arrows- with a suitable drill bit and take out loudspeaker.
  Note
t  It is essential that all swarf be removed from the door because otherwise corrosion damage will occur.
t  Please rectify any paintwork damage caused when drilling out the rivets immediately.
  N91-11487

Installing: > < Removing and installing front bass loudspeakers