seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Multi-function buttons: removing and installing|Installation > < Multi-function buttons: removing and installing

Leon Mk2

Removal:
Removal:
–  Disconnect ground cable battery.
–  Observe safety regulations for airbag systems. → Bodywork, Interior fitting work; Rep. gr.69
–  Remove driver's airbag. → Bodywork, Interior fitting work; Rep. gr.69
   
The two sets of multifunctional keys: for the left-hand side and for the right-hand side, can be removed together or separately.
–  Disconnect electrical connection -1- by pushing in the fastener.
  E91-10314
–  Remove both connectors of the actuator of horn -3- and lift the retainer of the airbag igniter connector -2-.
–  Left hand side: using the tool -3370-, insert into the gap and pull upwards-arrow-. In doing so, overcome the pressure retention -1-.
–  Remove cable from guide.
–  Right hand side: repeat the process, overcome both pressure retentions.
  E91-10315

Multi-function buttons: removing and installing|Installation > < Multi-function buttons: removing and installing