seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Activating the Diagnosis of the monitor > < Removing:

Leon Mk2

Installing:
Installing:
–  Insert the monitor into the housing in the ceiling console.
   
–  Tilt the monitor in such a way that the guides may be inserted -arrows- into the rails of the housing for the monitor.
–  Insert the monitor into the rails as far as it will go.
–  Fit the electric connector.
  E91-10232
–  Now situate the monitor in the position so that the lower plastic protrusions -arrows- to the left and right of the monitor are housed by the hatch retentions.
–  Now press both sides of the monitor at the same time -arrows- until the plastic protrusions click audibly into the retentions.
  Note
Whilst doing this, avoid pressing on the screen so as to not damage it.
–  Ensure that the monitor can be opened and closed without difficulty.
–  Finally, check the operation of the multimedia system. → Chapter
  E91-10233

Activating the Diagnosis of the monitor > < Removing: