seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Transmission power and possible fitting locations > < Installation and operation of two-way radios with a transmitting power above 10 watts is only permissible under the following co
Notes on performing repair work
Notes on performing repair work
Batteries must be disconnected before repair work is begun! → Electrical system, Rep. Gr. 27; Starter, battery voltage supply; Battery: removing and fitting
A valid circuit diagram is to be used → Current flow diagrams, Electrical fault finding and Fitting locations.
For removing and installing trim ⇒ General body repairs, interior or ⇒ General body repairs, exterior.
Observe manufacturer's operating and installation instructions for mobile telephones, two-way radios and aerials.
Use cable ties to secure wiring harnesses. Cover plug-in couplings with foam sheaths in order to avoid generating noise.
   

Transmission power and possible fitting locations > < Installation and operation of two-way radios with a transmitting power above 10 watts is only permissible under the following co