seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Speakers on the dash panel: removing and installing > < CD changer: Removing and installing|Fitting
Overview of radio systems 05.01 ▸
   
Overview of radio systems 05.01 ►
1 - Radio
q   Installed on the centre console.
q   Removal and installation → Chapter
2 - Threaded rod aerial
q   Alone, or combined with the telephone or navigation system, fitted on the roof.
q   With amplifier fitted into the aerial
q   Removal and installation → Chapter
3 - CD changer
q   Installed on the centre console.
q   Dismantling and fitting → Chapter
4 - Treble speakers -R14-, -R16-
q   Rear left and right lining
q   Technical data:
Nominal resistance = 4 Ω
Nominal power = 20W
Range of frequencies 1,800...20,000 Hz
q   Removal and installation → Chapter
5 - Bass speakers -R15-, -R17-
q   Rear left and right lining
q   Technical data:
Nominal resistance = 4 Ω
Nominal power = 20W
Range of frequencies 60...5,000 Hz
q   Removal and installation → Chapter
6 - Treble speakers -R20-, -R22-
q   A hemispherical speaker is fitted in the dash panel
q   Technical data:
Nominal resistance = 4 Ω
Nominal power = 20W
Range of frequencies 200Hz...12,000Hz
q   Removal and installation → Chapter
7 - Bass speakers -R21-, -R23-
q   In the lower part of the rear dashboard trim
q   Technical data:
Nominal resistance = 4 Ω
Nominal power = 20W
Range of frequencies 50...10,000 Hz
q   Removal and installation → Chapter

   

Speakers on the dash panel: removing and installing > < CD changer: Removing and installing|Fitting