seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Loudspeaker system > < AmplifierR12 (Exeo): Removing and installing

Leon Mk2

AmplifierR12 (Exeo ST): Removing and installing
Amplifier -R12- (Exeo ST): Removing and installing
–  Switch off all electrical components.
–  Remove the ignition key.
Removal:
–  Remove right side trim in the luggage compartment.
   
–  Disconnect electrical connection -2- of the amplified -R12--1- by pushing in the fastener -arrow-.
–  Undo the four screws -4- and remove the amplifier -R12--1-.
–  The bracket -3- is fixed to the bodywork using two screws and can be removed if required.
Installation
–  Installation is performed in reverse sequence.
Tightening torques: 3.5 Nm ± 0.5.
  E91-10399

Loudspeaker system > < AmplifierR12 (Exeo): Removing and installing