seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Installation: > < USB port: removing and installing

Leon Mk2

Removing:
Removing:
Before installing, the following operations must be carried out:
–  Disconnect ignition and all electrical loads, and remove ignition key.
–  Open the glove compartment.
–  Remove the storage devices and their wires from the USB connector.
   
–  Inserts the extraction tools into the grooves -arrows-.
  E91-10151
–  Push the extraction tools in the -direction of the arrow- to release the locking function. With the extraction tools in this position, remove the unit from the glove compartment, tilting it to access the connector.
–  Detach connector.
  E91-10152
–  Press the spring of the objects-holder compartment you have removed in the -direction of the arrow-, removing the extraction tool in the -direction of the arrow A-.
  E91-10153

Installation: > < USB port: removing and installing