seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Immobiliser > < Removing and installing bulbs for front interior and reading light in vehicles with panoramic sunroof

Leon Mk2

Removing and installing front reading light
Removing and installing front reading light
Special tools and workshop equipment required
   
t  Removal wedge -VAS 3409-
  Note
When removing and installing components that are in view (switches, covers, trim and so on), mask off areas in which tools (removal wedge -VAS 3409-, screwdriver) are used to lever out those components using commercially available masking tape.
Removing:
–  Switch off ignition and all electrical consumers, and remove ignition key.
–  Remove front interior and reading light → Chapter.
  W00-0016
–  Turn bulb holder -1- together with bulb of reading light in -direction of arrow- and then remove.
  N96-11015
–  Pull bulb -1- in -direction of arrow- out of bulb holder -2-.
Renewing bulbs for front passenger reading light -W13- or driver side reading light -W19-: Lam with glass housing 12 V, 5 W
Installing:
Installation is carried out in reverse order.
  N96-10413

Immobiliser > < Removing and installing bulbs for front interior and reading light in vehicles with panoramic sunroof