skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Technical Data|Brakes > < Steering
Electro-hydraulic and mechanical steering
   
Electro-hydraulic and mechanical steering
Type of steering:electro-hydraulic
(Electrically Powered Hydraulic Steering - EPHS)
mechanical
Steering gear:Rack pinion (input shaft)Rack pinion (input shaft)
Steering-wheel turns between end positions of the steering:2,914,04
Steering wheel diameter (mm):370370
Grease denomination for gear rack:TMS-L-10.482 1)
A0F 063 000 04 2)
SHELL STERAK
Grease amount for gear rack in steering gear (g):11,0 +5,040,0
Maximum clearance between thrust washer and cover (mm):0 to 0,080.04 to 0.09
Authorised axial force for the displacement of the gear rack (N):Displacement of the gear rack
t  ± 40 mm: Axial force ≤ 200 N
t  over 40 mm up to the stop: Axial force ≤ 250 N
(Displacement speed 1 cm/s)
---
Pinion torque (Nm):---
t  Steering angle ±180°: Pinion torque = 0.8...1.3 Nm
t  Steering-wheel angle over 180° up to the stop: Pinion torque = 0.8 up to 1.6 Nm
Rotating force of the track rods from the rest position (N):1.0 to 3.5 3)1.0 to 3.5 3)
Identification of the hydraulic oil:PENTOSIN CHF 11S
N 052 146 00
TL 52 146
or
PENTOSIN CHF 202
N 052 146 01
TL 52 146
Spare part no.: → Electronic catalogue of original parts
---
Quantity of hydraulic oil (l):0,80---

1) applies for TRW steering
2) applies for KOYO steering
3) after 2 rotations of the track rods
   

Technical Data|Brakes > < Steering