Fabia Mk1
Summary of components heater unit |
1 - | Fresh air blower series resistor -N24- |
q | removing and installing → Chapter |
2 - | Fresh/re-circulating air flap control motor -V154- |
q | removing and installing → Chapter |
3 - | Fresh air blower -V2- |
q | removing and installing → Chapter |
4 - | Dust and pollen filter |
q | also as combination filter with odour filter |
q | removing and installing → Chapter |
5 - | Heater control |
q | with fresh/re-circulating air flap control unit -J251- |
q | with fresh-air blower switch -E9- |
q | with fresh and re-circulating air flap switch -E159- |
q | must be replaced completely |
q | removing and installing → Chapter |
6 - | Flex shaft |
q | for temperature flap positioning unit (colour: purple; 256 mm long) |
q | for air distribution flap positioning unit (colour: blue; 250 mm long) |
q | removing and installing → Chapter |
7 - | Heating element for additional air heating (PTC) -Z35- |
q | only fitted on certain models |
q | Summary of components → Chapter |
q | removing and installing → Chapter |
8 - | Heat exchanger |
q | Summary of components → Chapter |
q | removing and installing → Chapter |
9 - | Positioning unit for temperature flap |
q | removing and installing → Chapter |
10 - | Gasket with holder |
q | clipped into heater unit |
q | replace if damaged |