–
| Position extractor -T10094A- onto the ignition coil with power output stage in the -direction of the arrow-. |
–
| Slightly pull out the ignition coil with power output stage. |
–
| Position the assembly device -T10118- as shown. |
–
| Carefully release the connector catch and unplug the connector. |
–
| Position extractor -T10094A- onto the ignition coil with power output stage. |
–
| Push connector onto the ignition coil with power output stage until it audibly locks into place. |
–
| Press the ignition coil with power output stage with extractor -T10094A- onto the spark plug in the cylinder head. |
|
|
|