skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Self diagnosis, V.A.G Inspection Service > < Removing and installing, testing pencil type glow plugs
Technical data
Technical data
   
Engine number
The engine number („engine identification characters“ and „serial number“) is located in the front left on the cylinder block at the engine/gearbox joint -arrow B-.
In addition, a sticker with „engine identification characters“ and „serial number“ is affixed to the timing case -arrow A-.
The engine identification characters are also indicated on the vehicle data sticker.
  S10-0191
Engine characteristics
Edition 10.2011; version 1.0
Engine identification charactersAWYBMDAZQBME
Manufactured02.02 ► 05.0405.04 ► 03.0801.03 ► 12.0412.04 ► 03.08
Exhaust limit values conforming toEU-4, EU-3 DDK, EU-2 DDKEU-4, EU-2 DDKEU-4, EU-3 DDK, EU-2 DDKEU-4, EU-2 DDK
Displacementl1,1981,1981,1981,198
Power outputkW at rpm40/475040/475047/540047/5400
TorqueNm at rpm106/3000108/3000112/3000112/3000
BoreØ mm76,576,576,576,5
Strokemm86,986,986,986,9
Cylinder / valves per cylinder 3/23/23/43/4
Compression ratio 10,3 : 110,3 : 110,5 : 110,5 : 1
Firing order 1-2-31-2-31-2-31-2-3
Fuel - RON unleaded 95 1)unleaded 95 1)unleaded 95 1)unleaded 95 1)
The injection and ignition systemSimos 3PDSimos 3PG2)Simos 3PESimos 3PG2)
Lambda control2 Lambda probes 3)2 Lambda probes 3)2 Lambda probes2 Lambda probes
Catalytic converter1 Catalyst1 Catalyst1 Catalyst1 Catalyst
Turbochargingnononono
Exhaust gas recirculationnonoyesyes4)
Secondary air systemnononono
Camshaft adjustmentnononono

1) At least 95 RON in exceptional cases; although engine output is reduced.
2) As of production date 05.06 Simos 9.1.
3) Engine version complying with exhaust emission standard EU-2 DDK only with one lambda probe before catalyst
4) As of production date 11.05, the exhaust gas recirculation is no longer fitted.
   

Self diagnosis, V.A.G Inspection Service > < Removing and installing, testing pencil type glow plugs