Fabia Mk2
The seat belts at the rear - summary of components |
1 - | 35 Nm |
2 - | Inertia reel for the outside safety belt |
Removing: |
– | Remove side trim panel of pillar D in the luggage compartment → Chapter. |
– | Remove screw (Pos. 3). |
Installing: |
– | Installation is carried out in the reverse order. |
3 - | 35 Nm |
4 - | 35 Nm |
5 - | Deflection fitting below |
Removing: |
– | Fold open rear seat → Chapter. |
– | Remove screw (Pos. 4). |
Installing: |
– | Installation is carried out in the reverse order. |
6 - | Belt buckle |
7 - | 35 Nm |
8 - | 35 Nm |
9 - | Inertia reel for the middle safety belt |
Removing: |
– | Remove the moulded headliner → Chapter. |
– | Remove screw (Pos. 8). |
– | Remove inertia reel from vehicle. |
Installing: |
– | Installation is carried out in the reverse order. |