Fabia Mk2
Summary of components of the brake caliper of the FS-III brake at the front |
Note
t | Install the complete repair set when undertaklng repairs. |
t | The brake calipers must be pre-bled before installing them in the vehicle (without brake pads) in case of a repair or when replacing them with new brake calipers → Chapter. |
t | Thinly coat brake cylinder, piston and gasket ring with lithium grease -G 052 150 A2-. |
1 - | Dust cap |
2 - | Vent valve, 10 Nm |
q | thinly coat thread with lithium grease -G 052 150 A2- before screwing in |
3 - | Bushing |
q | insert into the brake caliper |
4 - | Guide bolt, 28 Nm |
5 - | Caps |
q | insert in bushing |
6 - | Brake caliper |
7 - | Sealing ring |
q | removing and installing → Chapter |
8 - | Piston |
q | removing and installing → Chapter |
9 - | Collar |
q | removing and installing → Chapter |
q | do not damage when inserting the piston |