skoda Workshop Repair Guides

Skoda Fabia Workshop Service and Repair Manuals

ABOUT US
Wheels, tyres. axle align > < Removing and installing the wheel hub with wheel bearing - disc brake

Axle Stud Removal & Installation for Fabia Mk2 with Disc Brake

Removing and installing the axle stud - Disc brake
Removing and installing the axle stud - Disc brake
Special tools and workshop equipment required
t  Drive bushing -MP3-427 (40-21)-
t  Hub cap extractor -MP5-404 (VW 637/2)-
t  Vehicle Diagnosis, Measurement and Information System -VAS-
t  Brake pedal load, e.g. -V.A.G 1869/2-
t  Brake filling and bleeding device, e. g. -VAS 5234-
t  Bleeding bottle (commercially available)
t  Brake fluid → Chapter
  Note
t  Straightening work on axle studs is not allowed!
t  Re-cutting the axle stud thread is not allowed!
Removing:
–  Removing the wheel hub with wheel bearing → Chapter.
   
–  Release screws -arrows-.
–  Remove cover plate.
–  Remove the axle stud.
Installing:
Installation is carried out in the reverse order.
  S42-0295
Tightening torques:
Axle stud to axle body
t  Use new screws!
30 Nm + 90°
Twelve-point nut to axle stud
t  Use new nut!
70 Nm + 40°
Securing screw for brake disc to wheel hub4 Nm
Brake carrier with brake caliper to axle housing30 Nm + 30°
Wheel bolts → Chapter

   

Wheels, tyres. axle align > < Removing and installing the wheel hub with wheel bearing - disc brake