Removing and installing the axle stud - Drum brake |
Special tools and workshop equipment required |
t
| Drive bushing -MP3-427 (40-21)- |
t
| Hub cap extractor -MP5-404 (VW 637/2)- |
t
| Vehicle diagnosis, measurement and information system -VAS-; (not valid for vehicles without ABS) |
t
| Brake pedal load, e.g. -V.A.G 1869/2- |
t
| Brake filling and bleeding device, e. g. -VAS 5234- |
t
| Bleeding bottle (commercially available) |
Note t
| Straightening work on axle studs is not allowed! |
t
| Re-cutting the axle stud thread is not allowed! |
–
| Removing the wheel hub with wheel bearing → Chapter. |
–
| Remove brake line from wheel-brake cylinder → Chapter. |
|
|
|