Fabia Mk2
Summary of components of activated charcoal container system 04.10 ? |
Note
t | The hose connections are secured with spring strap clips or clamp-type clips. |
t | Always replace clamp-type clips with spring-type clips. |
t | Use pliers for spring strap clips to fit the spring strap clips. |
t | Safety precautions when working on the fuel supply system → Chapter. |
t | Rules of cleanliness when working on the fuel supply system → Chapter. |
1 - | Bleeder hose |
2 - | Activated charcoal filter system solenoid valve 1 -N80- with connection line |
q | attached with bracket to the intake manifold |
q | Valve is actuated (pulsed) by engine control unit -J623- when engine is warm |
q | check → Vehicle diagnosis, testing and information system VAS 5051 |
q | Valve closed when ignition is switched off |
3 - | Bleeder hose |
4 - | To the non-return valve |
5 - | Intake manifold |
6 - | Activated charcoal filter |
q | Fitting location: in rear right wheelhouse |
q | attached to the vehicle body |
q | filled by solenoid valve -N80- and by gravity valve |
q | Checking the fuel tank venting → Chapter |
q | removing: |
– | Removing the rear right wheel. |
– | Removing the plastic wheelhouse liner → Body Work → Rep. Gr.66. |
– | Disconnect lines -6- and -7-. |
– | Remove the activated charcoal filter from the body and push down. |
q | Installing: |
– | Installation is carried out in the reverse order. |
7 - | Vent line |
8 - | Vent line with gravity valve |
9 - | To the fuel filler flap unit |