Fabia Mk2
Summary of components of intake manifold |
1 - | Intake manifold |
2 - | Sealing ring |
q | replace |
3 - | 7 Nm |
4 - | Throttle valve control unit -J338- |
q | when replacing, adapt the engine control unit to the throttle valve control unit → Vehicle diagnosis, testing and information system VAS 5051 |
5 - | Bleeder hose |
q | from the activated charcoal filter system → Chapter |
6 - | Solenoid valve 1 for activated charcoal filter -N80- |
q | attached with bracket to the intake manifold |
7 - | Bleeder hose |
8 - | 20 Nm |
9 - | Vacuum hose |
q | To the brake servo unit |
10 - | O-ring |
q | replace if damaged |
11 - | Coolant hose |
q | for crankcase ventilation preheating |
12 - | Spring strap clamp |
13 - | Preheating for crankcase ventilation |
q | remove intake manifold for removing and installing |
14 - | 3 Nm |
15 - | Hose |
q | to vacuum regulating valve for crankcase ventilation (for oil separator) |
16 - | O-ring |
q | replace |
17 - | Intake manifold pressure sender -G71- with intake air temperature sender -G42- |